View All 300-715 Actual Exam Questions Answers and Explanations for Free May-2024
The Most In-Demand Cisco 300-715 Pass Guaranteed Quiz
To pass the Cisco 300-715 exam, you will need to have a solid understanding of Cisco ISE architecture, deployment models, and best practices. You will also need to be familiar with the various Cisco ISE components, such as the Policy Service, Monitoring and Troubleshooting, and Guest Services. In addition, you should be able to configure and troubleshoot Cisco ISE policies, network access devices, and user and device authentication.
Cisco Identity Services Engine is a powerful security solution that provides secure network access control and policy enforcement. The ISE solution integrates with other Cisco security products, such as AnyConnect VPN, Adaptive Security Appliance (ASA), and Firepower Threat Defense (FTD). The Cisco ISE solution is widely used in enterprise networks, government agencies, and other organizations to provide a secure and controlled network environment.
NEW QUESTION # 42
Which command displays all 802 1X/MAB sessions that are active on the switch ports of a Cisco Catalyst switch?
- A. show authentication sessions interface Gi 1/0/x
- B. show authentication sessions output
- C. Show authentication sessions
- D. show authentication sessions interface Gi1/0/x output
Answer: C
NEW QUESTION # 43
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?
- A. BYOD
- B. My devices
- C. Client provisioning
- D. MDM
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide
NEW QUESTION # 44
Drag and drop the configuration steps from the left into the sequence on the right to install two Cisco ISE nodes in a distributed deployment.
Answer:
Explanation:
NEW QUESTION # 45
An engineer is configuring a posture policy for Windows 10 endpoints and wants to ensure that users in each AD group have different conditions to meet to be compliant. What must be done to accomplish this task?
- A. Configure a simple condition for each AD group and use it in the posture policy for each use case
- B. Change the posture requirements to use an AD group lor each use case then use those requirements in the posture policy
- C. Use the authorization policy within the policy set to group each AD group with their respective posture policy
- D. identify The users groups needed for different policies and create service conditions to map each one to its posture requirement
Answer: C
NEW QUESTION # 46
Which two components are required for creating a Native Supplicant Profile within a BYOD flow? (Choose two )
- A. Windows Settings
- B. Connection Type
- C. Redirect ACL
- D. Operating System
- E. iOS Settings
Answer: D,E
NEW QUESTION # 47
An engineer is configuring Cisco ISE and needs to dynamically identify the network endpoints and ensure that endpoint access is protected. Which service should be used to accomplish this task?
- A. Posture
- B. Guest access
- C. Profiling
- D. Client provisioning
Answer: C
NEW QUESTION # 48
Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?
- A. DHCP server
- B. override Interface ACL
- C. AAA override
- D. static IP tunneling
Answer: C
NEW QUESTION # 49
A network administrator has just added a front desk receptionist account to the Cisco ISE Guest Service sponsor group.
Using the Cisco ISE Guest Sponsor Portal, which guest services can the receptionist provide?
- A. Configure authorization settings for guest users
- B. Create and manage guest user accounts
- C. Authenticate guest users to Cisco ISE
- D. Keep track of guest user activities
Answer: A
NEW QUESTION # 50
An engineer needs to configure a compliance policy on Cisco ISE to ensure that the latest encryption software is running on the C drive of all endpoints. Drag and drop the configuration steps from the left into the sequence on the right to accomplish this task.
Answer:
Explanation:
NEW QUESTION # 51
An administrator is configuring TACACS+ on a Cisco switch but cannot authenticate users with Cisco ISE. The configuration contains the correct key of Cisc039712287. but the switch is not receiving a response from the Cisco ISE instance What must be done to validate the AAA configuration and identify the problem with the TACACS+ servers?
- A. Check for server reachability using the test aaa group tacacs+ admin <key> legacy command.
- B. Validate that the key value is correct using the test aaa authentication admin <key> legacy command.
- C. Confirm the authorization policies are correct using the test aaa authorization admin drop legacy command.
- D. Test the user account on the server using the test aaa group radius server CUCS user admin pass <key> legacy command.
Answer: A
Explanation:
https://medium.com/training-course-ccna-security-210-260/ccna-security-part-3-implementing-aaa-in-cisco-ios-4b13ab285f51
NEW QUESTION # 52
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?
- A. Enable the privilege levels in Cisco ISE
- B. Define the command privileges for levels 2-5 in Cisco ISE
- C. Define the command privileges for levels 2-5 in the IOS devices
- D. Enable the privilege levels in the IOS devices.
Answer: D
Explanation:
https://learningnetwork.cisco.com/s/blogs/a0D3i000002eeWTEAY/cisco-ios-privilege-levels
NEW QUESTION # 53
An engineer is working with a distributed deployment of Cisco ISE and needs to configure various network probes to collect a set of attributes from the used to accomplish this task?
- A. policy service
- B. monitoring
- C. pxGrid
- D. primary policy administrator
Answer: C
NEW QUESTION # 54
By default, which traffic does an 802.IX-enabled switch allow before authentication?
- A. traffic permitted in the default ACL on the switch
- B. all traffic
- C. traffic permitted in the port dACL on Cisco ISE
- D. no traffic
Answer: A
NEW QUESTION # 55
Which two features must be used on Cisco ISE to enable the TACACS+ feature? (Choose two.)
- A. Command Sets
- B. Device Administration License
- C. Device Admin Service
- D. Server Sequence
- E. External TACACS Servers
Answer: B,C
Explanation:
Section: Network Access Device Administration
Explanation/Reference:
NEW QUESTION # 56
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION # 57
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two.)
- A. BYOD
- B. guest AUP
- C. new AD user 802 1X authentication
- D. posture
- E. hotspot
Answer: C,D
NEW QUESTION # 58
Users in an organization report issues about having to remember multiple usernames and passwords. The network administrator wants the existing Cisco ISE deployment to utilize an external identity source to alleviate this issue. Which two requirements must be met to implement this change? (Choose two.)
- A. Configure a secure LDAP connection.
- B. Establish access to one Global Catalog server.
- C. Enable IPC access over port 80.
- D. Provide domain administrator access to Active Directory.
- E. Ensure that the NAT address is properly configured
Answer: B,D
NEW QUESTION # 59
An engineer is configuring sponsored guest access and needs to limit each sponsored guest to a maximum of two devices. There are other guest services in production that rely on the default guest types. How should this configuration change be made without disrupting the other guest services currently offering three or more guest devices per user?
- A. Create a new sponsor group and adjust the settings to limit the devices for each guest.
- B. Create an LDAP login for each guest and tag that in the guest portal for authentication.
- C. Create an ISE identity group to add users to and limit the number of logins via the group configuration.
- D. Create a new guest type and set the maximum number of devices sponsored guests can register
Answer: A
NEW QUESTION # 60
An engineer is configuring TACACS+ within Cisco ISE for use with a non-Cisco network device. They need to send special attributes in the Access-Accept response to ensure that the users are given the appropriate access. What must be configured to accomplish this'?
- A. custom access conditions for defining the different roles
- B. shell profiles with custom attributes that define the various roles
- C. dACLs to enforce the various access policies for the users
- D. TACACS+ command sets to provide appropriate access
Answer: B
NEW QUESTION # 61
What is a characteristic of the UDP protocol?
- A. UDP offers information about a non-existent server
- B. UDP can detect when a server is down.
- C. UDP can detect when a server is slow
- D. UDP offers best-effort delivery
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service-radius/13838-10.html
NEW QUESTION # 62
Which RADIUS attribute is used to dynamically assign the Inactivity active timer for MAB users from the Cisco ISE node?
- A. radius-server timeout
- B. idle timeout
- C. termination-action
- D. session timeout
Answer: B
Explanation:
Reference:
When the inactivity timer is enabled, the switch monitors the activity from authenticated endpoints. When the inactivity timer expires, the switch removes the authenticated session. The inactivity timer for MAB can be statically configured on the switch port, or it can be dynamically assigned using the RADIUS Idle-Timeout attribute
NEW QUESTION # 63
Which are two characteristics of TACACS+? (Choose two ) ,
- A. It uses TCP port 49.
- B. It encrypts the password only.
- C. It uses UDP port 49.
- D. It combines authorization and authentication functions.
- E. It separates authorization and authentication functions.
Answer: A,E
NEW QUESTION # 64
......
300-715 Free Certification Exam Material with 246 Q&As : https://tesking.pass4cram.com/300-715-dumps-torrent.html