Latest 2022 Realistic Verified NSE7_EFW-6.4 Dumps - 100% Free NSE7_EFW-6.4 Exam Dumps
Get 2022 Updated Free Fortinet NSE7_EFW-6.4 Exam Questions and Answer
Difficulty in Writing Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
The difficulty of any exam is a relative phenomenon. Also, it is quite tough to answer this without knowing your academic background and whether you have any prior exposure to financial markets. If you have prior exposure in the field of financial markets and follow the markets regularly, I think you will do just fine. However, if you are completely new to this field, you may have a hard time understanding a few concepts, but it is still manageable.
You will be tested extensively only on the topics in the curriculum provided by NSE. It is more of a knowledge-based test rather than an application-based test. Make sure you do not miss any topic from the curriculum. There are no negative marks for incorrect answers in foundation modules. There are negative marks for incorrect answers in intermediate and advanced modules. Every exam can become a difficult one if not well prepared. Lots of study material for this exam is available online, at the official website, and in the form of NSE7 EFW-6.4 practice exam dumps. Pass4cram provide the best quality exam dumps that are updated very often to keep them up to the mark. If students practice these exam dumps and take the NSE7 EFW-6.4 practice exams, they can surely overcome the exam difficulty and clear the exam with good grades. Below is a list of topics that students usually find difficult and challenging. Make sure you cover them in detail.
NEW QUESTION 66
When using the SSL certificate inspection method for HTTPS traffic, how does FortiGate filter web requests when the browser client does not provide the server name indication (SNI) extension?
- A. FortiGate uses the requested URL from the user's web browser.
- B. FortiGate uses CN information from the Subject field in the server's certificate.
- C. FortiGate switches to the full SSL inspection method to decrypt the data.
- D. FortiGate blocks the request without any further inspection.
Answer: B
NEW QUESTION 67
Examine the output of the 'diagnose sys session list expectation' command shown in the exhibit; than answer the question below.
Which statement is true regarding the session in the exhibit?
- A. It was created by the FortiGate kernel to allow push updates from FotiGuard.
- B. It was created by a session helper or ALG.
- C. It is for managementtraffic terminating at the FortiGate.
- D. It is for traffic originated from the FortiGate.
Answer: B
NEW QUESTION 68
An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device. The administrator decides to enable the setting link-failed-signal to fix the problem.
Which statement about this setting is true?
- A. It disabled all the non-heartbeat interfaces in all HA members for two seconds after a failover.
- B. It forces the former primary device to shut down all its non-heartbeat interfaces for one second, while the failover occurs.
- C. It sends a link failed signal to all connected devices.
- D. It sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.
Answer: B
NEW QUESTION 69
An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.
Why didn't the script make any changes to the managed device?
- A. Static routes can only be added using TCL scripts.
- B. Incomplete commands are ignored in CLI scripts.
- C. Commands that start with the # sign are not executed.
- D. CLI scripts will add objects only if they are referenced by policies.
Answer: C
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scripts/1000_Script%20samples/0200_CLI%20scripts+.htm#Error_Messages A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.
NEW QUESTION 70
View the following FortiGate configuration.
All traffic to the Internet currently egresses from port1. The exhibit shows partial session information for Internet traffic from a user on the internal network:
If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user's session?
- A. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
- B. The session would remain in the session table, and its traffic would start to egress from port2.
- C. The session would remain in the session table, and its traffic would still egress from port1.
- D. The session would be deleted, so the client would need to start a new session.
Answer: C
Explanation:
http://kb.fortinet.com/kb/documentLink.do?externalID=FD40943
NEW QUESTION 71
Refer to the exhibit, which contains the output of get system ha status.
Which two statements about the output are true? (Choose two.)
- A. The slave configuration is synchronized with the master.
- B. The HA management IP is 169.254.0.2.
- C. Master is selected based on the priority configured under config system ha.
- D. port7 is used as the HA heartbeat on all devices in the cluster.
Answer: C,D
NEW QUESTION 72
Which of the following statements is trueregarding a FortiGate configured as an explicit web proxy?
- A. FortiGate limits the total number of simultaneous explicit web proxy users.
- B. FortiGate limits the number of workstations that authenticate using the same web proxy usercredentials.
This limit CANNOT be modified by the administrator. - C. FortiGate limits the number of simultaneous sessions per explicit web proxy user The limit CAN be modified by the administrator
- D. FortiGate limits the number of simultaneous sessions per explicit web proxy user. This limit CANNOT be modified by the administrator.
Answer: A
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/52data/Content/FortiOS/fortigate-WAN-opt-52/web_proxy.htm#Explicit2 The explicit proxy does not limit the number of active sessions for each user. As a result the actual explicit proxy session count is usually much higherthan the number of explicit web proxy users. If an excessive number of explicit web proxy sessions is compromising system performance you can limit the amount of users if the FortiGate unit is operating with multiple VDOMs.
NEW QUESTION 73
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs thedebug flow while attempting the connection using HTTP. The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. HTTP administrative access is configured with a port number different than 80.
- B. The packet is denied because of reverse path forwarding check.
- C. Redirection of HTTP to HTTPS administrative access is disabled.
- D. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
Answer: A,D
NEW QUESTION 74
A FortiGate device has the following LDAP configuration:
The administrator executed the 'dsquery' command in the Windows LDAp server 10.0.1.10, and got the following output:
>dsquery user -samid administrator
"CN=Administrator, CN=Users, DC=trainingAD, DC=training, DC=lab"
Based on the output, what FortiGate LDAP setting is configured incorrectly?
- A. username.
- B. password.
- C. dn.
- D. cnid.
Answer: A
Explanation:
https://kb.fortinet.com/kb/viewContent.do?externalId=FD37516
NEW QUESTION 75
Examine the following partialoutput from a sniffer command; then answer the question below.
What is the meaning of the packets dropped counter at the end of the sniffer?
- A. Number of packets that didn't match the sniffer filter.
- B. Number of packets that matched the sniffer filter but could not be captured by the sniffer.
- C. Number of total packets dropped by the FortiGate.
- D. Number of packets that matched the sniffer filter and were dropped by the FortiGate.
Answer: B
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=11655
NEW QUESTION 76
View the exhibit, which contains an entry in the session table, and then answer the question below.
Which one of the following statements is true regarding FortiGate's inspection of this session?
- A. FortiGate applied flow-based inspection.
- B. FortiGate applied proxy-based inspection.
- C. FortiGate forwarded this session without any inspection.
- D. FortiGate applied explicit proxy-based inspection.
Answer: B
Explanation:
https://kb.fortinet.com/kb/viewContent.do?externalId=FD30042
NEW QUESTION 77
View the exhibit, which contains the output of a BGP debug command, and then answer the question below.
Which ofthe following statements about the exhibit are true? (Choose two.)
- A. The local router has not established a TCP session with 100.64.3.1.
- B. Since the counters were last reset; the 10.200.3.1 peer has never been down.
- C. The local router's BGP state is Established with the 10.125.0.60 peer.
- D. The local router has received atotal of three BGP prefixes from all peers.
Answer: A,C
NEW QUESTION 78
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn't the tunnel come up?
- A. The pre-shared keys do not match.
- B. The remote gateway is using aggressive mode and the local gateway is configured to use man mode.
- C. The remote gateway's phase 1 configuration does not match the local gateway's phase 1 configuration.
- D. The remote gateway's phase 2configuration does not match the local gateway's phase 2 configuration.
Answer: C
NEW QUESTION 79
View the exhibit, which contains the output of get sys ha status, and then answer the question below.
Which statements are correct regarding the output? (Choose two.)
- A. The slave configuration is not synchronized with the master.
- B. port 7 is used the HA heartbeat on all devices in the cluster.
- C. Master is selected because it is the only device in the cluster.
- D. The HA management IP is 169.254.0.2.
Answer: A,B
NEW QUESTION 80
View the exhibit, which contains a partial output of an IKE real-time debug, and then answer the question below.
Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
- A. auto-discovery-sender
- B. auto-discovery-forwarder
- C. auto-discovery-shortcut
- D. auto-discovery-receiver
Answer: B
NEW QUESTION 81
View the IPS exit log, and then answer the question below.
# diagnose test application ipsmonitor 3
ipsengine exit log"
pid = 93 (cfg), duration = 5605322 (s) at Wed Apr19 09:57:26 2017
code = 11, reason: manual
What is the status of IPS on this FortiGate?
- A. All IPS-related features have been disabled in FortiGate's configuration.
- B. There are communication problems between theIPS engine and the management database.
- C. IPS engine memory consumption has exceeded the model-specific predefined value.
- D. IPS daemon experienced a crash.
Answer: A
Explanation:
Explanation
The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes.Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated:Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)
NEW QUESTION 82
Which of the following statements are correct regarding application layer test commands? (Choose two.)
- A. They display real-time application debugs.
- B. Some of them can be used to restart an application.
- C. They are used to filter real-time debugs.
- D. Some of them display statistics and configuration information about a feature or process.
Answer: B,D
Explanation:
Application layer test commands don't display info in real time, but they do show statistics and configuration info about a feature or process. You can also use some of these commands to restart a process or execute a change in its operation.
NEW QUESTION 83
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statement can explain why the state of the remote BGP peer 10.200.3.1 is Connect?
- A. The local peer has received the BGP prefixed from the remote peer.
- B. The TCP session for the BGP connection to 10.200.3.1 is down.
- C. The local peer is receiving the BGP keepalives from the remote peer but it has not received the OpenConfirm yet.
- D. The local peer is receiving the BGP keepalives from the remote peer but it has not received any BGP prefix yet.
Answer: B
Explanation:
http://www.ciscopress.com/articles/article.asp?p=2756480&seqNum=4
NEW QUESTION 84
Which statement is true regarding File description (FD) conserve mode?
- A. A FortiGate enters FD conserve mode when the amount of available description is less than 5%.
- B. FD conserve mode affects all daemons running on the device.
- C. IPS inspection is affected when FortiGate enters FD conserve mode.
- D. Restarting the WAD process is required to leave FD conserve mode.
Answer: A
NEW QUESTION 85
What conditions are required for two FortiGate devices to form an OSPF adjacency? (Choose three.)
- A. IP addressesare in the same subnet.
- B. OSPF costs match.
- C. OSPF IP MTUs match.
- D. OSPF peer IDs match.
- E. Hello and dead intervals match.
Answer: A,C,E
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-advanced-routing-54/Routing_OSPF/OSPF_Bac
NEW QUESTION 86
View theexhibit, which contains the output of a BGP debug command, and then answer the question below.
Which of the following statements about the exhibit are true? (Choose two.)
- A. The local BGP peer has not established a TCP session to the BGP peer 10.200.3.1.
- B. The local BGPpeer has received a total of three BGP prefixes.
- C. Since the BGP counters were last reset, the BGP peer 10.200.3.1 has never been down.
- D. For the peer 10.125.0.60, the BGP state of is Established.
Answer: A,D
NEW QUESTION 87
Refer to the exhibit, which contains partial outputs from two routing debug commands.
Why is the port2 default route not in the second command's output?
- A. It has a higher priority value than the default route using port1.
- B. It has a lower priority value than the default route using port1.
- C. It has a higher distance than the default route using port1.
- D. It is disabled in the FortiGate configuration.
Answer: C
NEW QUESTION 88
Which of the following statements are true regardingthe SIP session helper and the SIP application layer gateway (ALG)? (Choose three.)
- A. SIP ALG supports SIP HA failover; SIP helper does not.
- B. SIP ALG supports SIP over IPv6; SIP helper does not.
- C. SIP session helper runs in the kernel; SIP ALG runs as a user space process.
- D. SIP helper supports SIP over TCP and UDP; SIP ALG supports only SIP over UDP.
- E. SIP ALG can create expected sessions for media traffic; SIP helper does not.
Answer: A,B,E
NEW QUESTION 89
......
Average Salary of Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certified Professional
It is important to understand the kind of salary you can expect from this kind of career path while looking for advancement and progress in the world of field engineers and Fortinet NSE certification. Salaries at Fortinet are expected to range from $65,000 to about $105,000, and the average salary is about $85,000 for a certified NSE engineer.
Of course, by ensuring that you do more to help you earn, and increasing your skills and qualifications, you can focus on trying to develop this. You can also go to the Field Engineer and see if they can help you increase your prospective earnings and obtain better positions.
Introduction to Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
This exam is part of the preparation for the NSE 7 certification exam. The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions. Visit the Fortinet NSE Certification Program page for information about certification requirements. You must pass a minimum of two Fortinet NSE 7 certification tests successfully:
- Fortinet NSE 7 - Secure Access
- Fortinet NSE 7 - Cloud Security
- Fortinet NSE 7 - SD-WAN
- Fortinet NSE 7 - Advanced Threat Protection
- Fortinet NSE 7 - Enterprise Firewall
The NSE 7 Network Security Architect designation recognizes your advanced skills and ability to deploy, administer, and troubleshoot Fortinet security solutions. To obtain certification, you must pass at least one Fortinet NSE 7 exam. NSE 7 certification is valid for two years from the date of completion. you will learn how FortiGate, FortiAP, FortiSwitch, and FortiAuthenticator enable secure connectivity over wired and wireless networks. You will also learn how to provision, administer, and monitor FortiAP and FortiSwitch devices using FortiManager. This course covers the deployment, integration, and troubleshooting of advanced authentication scenarios, as well as best practices for securely connecting wireless and wired users. You will learn how to keep the network secure by leveraging Fortinet Security Fabric integration between FortiGate, FortiSwitch, FortiAP, and FortiAnalyzer to automatically quarantine risky and compromised devices using IOC triggers.
NSE7_EFW-6.4 Dumps PDF and Test Engine Exam Questions: https://tesking.pass4cram.com/NSE7_EFW-6.4-dumps-torrent.html