F5 301a Practice Test Pdf Exam Material
301a Answers 301a Free Demo Are Based On The Real Exam
NEW QUESTION 31
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?
- A. Performance 14 virtual server with a FastHTTP profile
- B. Standard virtual server with an HTTP profile
- C. Performance 14 virtual server with an HTTP profile
- D. Standard virtual server with a TCP profile
Answer: C
NEW QUESTION 32
An LTM device needs an additional traffic group.
Which configuration item is required?
- A. Group name
- B. Default device
- C. MAC Masquerade Address
- D. Auto Fallback Timeout
Answer: A
NEW QUESTION 33
An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual server type should be used?
- A. Performance (HTTP)
- B. Standard
- C. Stateless
- D. Performance (Layer 4)
Answer: D
NEW QUESTION 34
A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?
- A. Performance (Layer 4)-pure layer A forwarding
- B. Stateless TCP protocol is not applicable
- C. forwarding (Layer 2) pure routing forwarding, pool cannot be specified
- D. Standard-tcp profile exists, RFC verification will be performed
Answer: A
NEW QUESTION 35
A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN Which TMOS command enables this behavior?
- A. tmsh create sys ha-group External trunks add Externally
- B. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
- C. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))
- D. tmsh modify net van External failsafe enabled
Answer: B
NEW QUESTION 36
Exhibit.
Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?
- A. LTM1 Standby / LTM2 Active
- B. LTM1 Active / LTM2 Standby
- C. LTM1 Active /LTM2 Active
- D. LTM1 Standby / LTM2 Standby
Answer: B
NEW QUESTION 37
An LTM Specialist observes decreased performance and intermittent connection reap LTM system.
Based on the configuration, which action will address these issues?
- A. Use a shorter idle timeout on the TCP profile.
- B. Use an optimized TCP profile.
- C. Use a default caching profile on the virtual server.
- D. Use a FastL4 profile on the virtual server
Answer: A
NEW QUESTION 38
An LTM Specialist must reconfigure a BIG-IP system that load balances traffic to a web application. The security department has informed the LTM Specialist that the following cipher string must be used for TLS connections from BIG-IP to the web application.
NATIVE:IMDS:EXPORT:IDHE:EDH@SPEED
In which virtual server profile should the cipher string be configured?
- A. Server SSL
CB. Client SSL - B. Rewrite profile
- C. SPDY profile
Answer: A
Explanation:
Require SSL and flow F5 to server, server ssl
NEW QUESTION 39
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)
- A. enable Mirroring for a virtual server and persistence profile
- B. enable Clone Pools for a virtual server and a persistence profile
- C. configure a VLAN and primary mirroring address for mirror traffic
- D. configure a OneConnect profile to mirror connections
- E. configure a serial failover cable for mirror traffic
Answer: A,C
NEW QUESTION 40
A Client makes the request displayed below to the application server.
Which virtual server type should an LTM Specialist use to load balance based on the URI?
.
- A. Performance (Layer 4)
- B. Stateless
- C. Forwarding (Layer 2)
- D. Standard
Answer: D
NEW QUESTION 41
A virtual server configuration for traffic destined to a server is as shown:
HTTP traffic is destined to the 10 10.20.1 server from the source
Based on precedence, which virtual server accepts this traffic?
- A. MyvS1
- B. MyVS3
- C. MyVS4
- D. MyVS2
Answer: D
NEW QUESTION 42
To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?
- A. Demand
- B. Require
- C. Request
- D. ignore
Answer: B
NEW QUESTION 43
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?
- A. ...BEGIN CERTIFICATE....
- B. ...SSL CERTIFICATE....
- C. ...SECURITY CERTIFICATE....
- D. --START CERTIFICATE....
Answer: A
NEW QUESTION 44
An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:
What does the LTM Specialist need to change in the configuration to avoid this issue?
- A. persistence mirroring
- B. connection mirroring
- C. ftp profile
- D. snatpool
Answer: B
Explanation:
The stem mentions that it is a single server node, so there is no need to consider the factors of session maintenance. The actual requirement is to maintain the original connection status during failover. You need to configure connection mirroring to synchronize the connection status between the devices in the cluster in real time.
NEW QUESTION 45
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?
- A. DHCP relay
- B. Standard
- C. Stateless
- D. Forwarding (Layer 2)
- E. Forwarding (IP)
Answer: E
NEW QUESTION 46
A web developer needs a virtual server configured for an application.
The application details are as follows:
Application is accessed on port 443.
The application traffic is encrypted by the server.
HTTP is not being used. No data manipulation is necessary.
Throughput is critical.
NO connections are terminated on the LTM.
Which configuration provides the best performance?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: C
NEW QUESTION 47
Refer to the exhibit
Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?
- A. 10.1.1.1
- B. 72.10.1.1
- C. 10.1.1.3
- D. 10.1.1.2 0
Answer: C
NEW QUESTION 48
Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?
- A. Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust, Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device Group.
- B. Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type. Establish Device Trust, Create Device Group
- C. Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group
- D. Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group.
Answer: D
NEW QUESTION 49
An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?
- A. Impact on system performance that might be noticeable
- B. The add-on license that is required for this feature to be available
- C. Creating the required separate interface for connection mirroring
- D. Decreased number of possible concurrent connections to that virtual server
Answer: A
Explanation:
Connection mirroring will bring performance consumption
NEW QUESTION 50
An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?
- A. Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot
- B. Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot
- C. Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host
- D. Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot
Answer: D
Explanation:
Switch guest, reactive, license first and then upgrade.
NEW QUESTION 51
......
301a [Dec-2021] Newly Released] Exam Questions For You To Pass: https://tesking.pass4cram.com/301a-dumps-torrent.html