AZ-700 Free Exam Study Guide! (Updated 120 Questions)
AZ-700 Dumps for Microsoft Certified: Azure Network Engineer Associate Certified Exam Questions and Answer
Preparation guide for Microsoft AZ-700 Certification
Study Tips for Microsoft AZ-700 Certification
Just how to Prepare for the Microsoft AZ-700 Certification
Microsoft AZ-700 certification exam is offered by Microsoft for its Worldwide Partner Network (WWPN) members to ensure the quality of their products. This certification is based on the eight-step process of Configuration Management Lifecycle (CML) and enables employees to achieve the knowledge, skills, and abilities needed to effectively manage products. The Certification Exam System can be used as a test preparation tool for those who want a preview of what will be covered in this test or as an actual test with our real question bank. Microsoft AZ-700 Dumps is the best material for the certification tests as it contains all the essential questions as per the actual exam.
The Process of Configuring Microsoft AZ-700 Exam
Microsoft has developed a practice test software for the Microsoft AZ-700 certification exam. The chance of failure is increased when a candidate does not use a study guide to prepare for the exam. The Microsoft Certification Practice Exam software was created to provide a preview of what to expect on the AZ-700 certification exam. It can also be used as an actual test with our real question bank. Hard skills that are required of an individual to be successful for this certification are covered in the exam software. A person can be certified for this certification if they have passed the practice test software. The practice test software is self-paced and does not require any specific skills or knowledge. Local libraries, employers, or community colleges are great resources for locating these products. To be successful on the certification exam an individual must have specific skills. An individual does not have to study the entire time they are preparing for this exam because this software will help them to understand what is required of them. Blocks of time should be set aside for studying with the practice test software.
The practice test software requires a person to have at least twelve-hundred hours of experience with Microsoft technologies. An individual pursuing this certification should have a good understanding of the areas that will be covered in the exam. Method and /or a study guide must be used to prepare for the exam. Experience is required in understanding how to use Microsoft products for the test. Understanding the role, scope, and process of configuration management will assist an individual in being successful. ASG and Azure are fundamental to the exam. Microsoft Certification Practice Exam software is used to prepare for the exam. Microsoft AZ-700 Dumps will help an individual to be more confident and prepared when taking the exam. Introduction to the exam, understanding roles and responsibilities and Microsoft Azure Automation and Desired State Configuration (DSC), the practice test software is used to prepare for the exam. Sets of questions are provided with each completion of the practice test software. The questions are based on real exam scenario, so it is important an individual understands these scenarios. The individual must know how to use the steps in completing the exam correctly.
NEW QUESTION 35
You have an Azure subscription that contains the virtual machines shown in the following table.
Subnet1 and Subnet2 are associated to a network security group (NSG) named NSG1 that has the following outbound rule:
Priority: 100
Port: Any
Protocol: Any
Source: Any
Destination: Storage
Action: Deny
You create a private endpoint that has the following settings:
Name: Private1
Resource type: Microsoft.Storage/storageAccounts
Resource: storage1
Target sub-resource: blob
Virtual network: Vnet1
Subnet: Subnet1
For each of the following statements, select Yes of the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 36
You need to configure the default route on Vnet2 and Vnet3. The solution must meet the virtual networking requirements.
What should you use to configure the default route?
- A. route filters
- B. a user-defined route assigned to GatewaySubnet in Vnet1
- C. a user-defined route assigned to GatewaySubnet in Vnet2 and Vnet3
- D. BGP route exchange
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-udr-overview Overview This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab. note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
NEW QUESTION 37
You have the Azure App Service app shown in the App Service exhibit.
The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.
The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint connections exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-integrate-with-vnet
NEW QUESTION 38
You have an Azure subscription that contains a user named Admin1 and a resource group named RG1.
RG1 contains an Azure Network Watcher instance named NW1.
You need to ensure that Admin1 can place a lock on NW1. The solution must use the principle of least privilege.
Which role should you assign to Admin1?
- A. Resource Policy Contributor
- B. Network Contributor
- C. Monitoring Contributor
- D. User Access Administrator
Answer: B
NEW QUESTION 39
Your company has an Azure virtual network named Vnet1 that uses an IP address space of 192.168.0.0/20. Vnet1 contains a subnet named Subnet1 that uses an IP address space of 192.168.0.0/24.
You create an IPv6 address range to Vnet1 by using a CIDR suffix of /48.
You need to enable the virtual machines on Subnet1 to communicate with each other by using IPv6 addresses assigned by the company. The solution must minimize the number of additional IPv4 addresses.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/ipv6-overview
https://docs.microsoft.com/en-us/azure/virtual-network/ipv6-add-to-existing-vnet-powershell
NEW QUESTION 40
You create NSG10 and NSG11 to meet the network security requirements.
For each of the following statements, select Yes it the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
Box 1: No
NSG10 which is attached to VM1's subnet blocks RDP (port TCP 3389) to 'Any' which means the port is blocked to all destinations.
Box 2: Yes
NSG10 blocks ICMP from VNet4 (source 10.10.0.0/16) but it is not blocked from VM2's subnet (VNet1/Subnet2).
Box 3: No
NSG11 blocks RDP (port TCP 3389) destined for 'VirtualNetwork'. VirtualNetwork is a service tag and means the address space of the virtual network (VNet1) which in this case is 10.1.0.0/16. Therefore, RDP traffic from subnet2 to anywhere else in VNet1 is blocked.
NEW QUESTION 41
In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate ASG1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 42
You plan to deploy Azure Virtual WAN.
You need to deploy a virtual WAN hub that meets the following requirements:
Supports 10 sites that will connect to the virtual WAN hub by using a Site-to-Site VPN connection Supports 8 Gbps of ExpressRoute traffic Minimizes costs What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about
NEW QUESTION 43
You need to connect an on-premises network and an Azure environment. The solution must use ExpressRoute and support failing over to a Site-to-Site VPN connection if there is an ExpressRoute failure.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/expressroute/expressroute-howto-coexist-resource-manager
NEW QUESTION 44
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two Azure virtual networks named Vnet1 and Vnet2.
You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.
You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit. Vnet2 can use the remote gateway.
You discover that Client1 cannot communicate with Vnet2.
You need to ensure that Client1 can communicate with Vnet2.
Solution: You download and reinstall the VPN client configuration.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
The VPN client must be downloaded again if any changes are made to VNet peering or the network topology.
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing
Topic 1, Contoso
Existing Environment:
Azure Network Infrastructure
Contoso has an Azure Active Directory (Azure AD) tenant named contoso.com.
The Azure subscription contains the virtual networks shown in the following table.
Vnet1 contains a virtual network gateway named GW1.
Azure Virtual Machines
The Azure subscription contains virtual machines that run Windows Server 2019 as shown in the following table.
The NSGs are associated to the network interfaces on the virtual machines. Each NSG has one custom security rule that allows RDP connections from the internet. The firewall on each virtual machine allows ICMP traffic.
An application security group named ASG1 is associated to the network interface of VM1.
Azure Private DNS Zones
The Azure subscription contains the Azure private DNS zones shown in the following table.
Zone1.contoso.com has the virtual network links shown in the following table.
Other Azure Resources
The Azure subscription contains additional resources as shown in the following table.
Requirements:
Virtual Network Requirements
Contoso has the following virtual networks requirements:
* Create a virtual network named Vnet6 in West US that will contain the following resources and configurations:
Two container groups that connect to Vnet6
Three virtual machines that connect to Vnet6
Allow VPN connections to be established to Vnet6
Allow the resources in Vnet6 to access KeyVault1, DB1, and Vnet1 over the Microsoft backbone network
* The virtual machines in Vnet4 and Vnet5 must be able to communicate over the Microsoft backbone network.
* A virtual machine named VM-Analyze will be deployed to Subnet1. VM-Analyze must inspect the outbound network traffic from Subnet2 to the internet.
Network Security Requirements
Contoso has the following network security requirements:
* Configure Azure Active Directory (Azure AD) authentication for Point-to-Site (P2S) VPN users.
* Enable NSG flow logs for NSG3 and NSG4.
* Create an NSG named NSG10 that will be associated to Vnet1/Subnet1 and will have the custom inbound security rules shown in the following table.
* Create an NSG named NSG11 that will be associated to Vnet1/Subnet2 and will have the custom outbound security rules shown in the following table.
NEW QUESTION 45
Your company has 10 instances of a web service. Each instance is hosted in a different Azure region and is accessible through a public endpoint.
The development department at the company is creating an application named App1. Every 10 minutes. App1 will use a list of end points and connect to the first available endpoint.
You plan to use Azure Traffic Manager to maintain the list of endpoints.
You need to configure a Traffic Manager profile that will minimize the impact of DNS caching.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 46
You have Azure App Service apps in the West US Azure region as shown in the following table.
You need to ensure that all the apps can access the resources in a virtual network named Vnet1 without forwarding traffic through the internet-How many integration subnets should you create?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: E
NEW QUESTION 47
You have two Azure virtual networks named Vnet1 and Vnet2 in an Azure region that has three availability zones.
You deploy 12 virtual machines to each virtual network, deploying four virtual machines per zone. The virtual machines in Vnet1 host an app named App1. The virtual machines in Vnet2 host an app named App2.
You plan to use Azure Virtual Network NAT to implement outbound connectivity for App1 and App2.
You need to identify the minimum number of subnets and Virtual Network NAT instances required to meet the following requirements:
* A failure of two zones must NOT affect the availability of either App1 or App2.
* A failure of two zones must NOT affect the outbound connectivity of either Appl1or App2.
What should you identify? To answer, select the appropriate options in the answer are a.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 48
You are planning an Azure solution that will contain the following types of resources in a single Azure region:
Virtual machine
Azure App Service
Virtual Network gateway
Azure SQL Managed Instance
App Service and SQL Managed Instance will be delegated to create resources in virtual networks.
You need to identify how many virtual networks and subnets are required for the solution. The solution must minimize costs to transfer data between virtual networks.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-for-azure-services#services-that-can-be-deployed-into-a-virtual-network
NEW QUESTION 49
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have two Azure virtual networks named Vnet1 and Vnet2.
You have a Windows 10 device named Client1 that connects to Vnet1 by using a Point-to-Site (P2S) IKEv2 VPN.
You implement virtual network peering between Vnet1 and Vnet2. Vnet1 allows gateway transit. Vnet2 can use the remote gateway.
You discover that Client1 cannot communicate with Vnet2.
You need to ensure that Client1 can communicate with Vnet2.
Solution: You download and reinstall the VPN client configuration.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
The VPN client must be downloaded again if any changes are made to VNet peering or the network topology.
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing
NEW QUESTION 50
You have an Azure subscription that contains the resources shown in the following table.
Gateway1 provides access to App1 by using a URL of http://app1.contoso.com.
You create a new web app named App2.
You need to configure Gateway1 to enable minimize administrative effort.
What should you configure on Gateway1?
- A. a listener, a backend pool, and a rule
- B. a listener and a routing rule
- C. a backend pool and a routing
- D. a listener and a backend pool
Answer: B
NEW QUESTION 51
You have an Azure subscription that contains a single virtual network and a virtual network gateway.
You need to ensure that administrators can use Point-to-Site (P2S) VPN connections to access resources in the virtual network. The connections must be authenticated by Azure Active Directory (Azure AD).
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 52
......
Use Real AZ-700 Dumps - 100% Free AZ-700 Exam Dumps: https://tesking.pass4cram.com/AZ-700-dumps-torrent.html