[Oct-2025] 100% Actual D-VXR-DS-00 dumps Q&As with Explanations Verified & Correct Answers
D-VXR-DS-00 Dumps with Free 365 Days Update Fast Exam Updates
NEW QUESTION # 60
What are two rules for witness on a VxRail stretched cluster? (Choose two.)
- A. It can be managed by a separate vCenter than the one managing the VxRail cluster.
- B. The Witness appliance is the same for vSAN ESA and vSAN OSA architecture.
- C. It must be the same vSphere version as the VxRail nodes.
- D. It must be deployed in advance.
- E. Only a virtual appliance is supported.
Answer: A,B
Explanation:
The witness appliance is the same for both vSAN ESA and OSA architectures, providing consistency across deployments.
The witness can be managed by a separate vCenter server than the one managing the VxRail cluster, allowing flexible management options.
NEW QUESTION # 61
Which factors impact the design of a 2-node VxRail cluster?
(Choose two)
Response:
- A. Dedicated Fibre Channel connectivity
- B. VLAN segregation for management and storage traffic
- C. Enabling multipathing for vSAN traffic
- D. Witness host deployment
Answer: B,D
NEW QUESTION # 62
The VxRail Cluster Configuration Report includes which three parameters that are required to perform the deployment? (Choose three.)
- A. vCenter Server hostname
- B. Administrative passwords
- C. DNS server IP address
- D. PTP server IP address
- E. VxRail node hostnames
Answer: A,C,E
Explanation:
The VxRail Cluster Configuration Report includes essential deployment parameters such as vCenter Server hostname, DNS server IP address, and VxRail node hostnames to ensure proper network and management configuration during deployment.
NEW QUESTION # 63
What is a primary benefit of a stretch cluster configuration in VxRail?
Response:
- A. Cross-site disaster recovery
- B. Increased IOPS
- C. Reduced storage footprint
- D. Simplified network architecture
Answer: A
NEW QUESTION # 64
What is the minimum number of hosts required to enable fault tolerance in a VxRail cluster?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 65
What are key design considerations for a stretch cluster in VxRail?
(Choose two)
Response:
- A. Configuring hybrid storage drives
- B. Enabling deduplication and compression
- C. Latency between sites
- D. Placement of witness host
Answer: C,D
NEW QUESTION # 66
What is the default network architecture used by VxRail for communication between nodes?
Response:
- A. Wi-Fi
- B. Token Ring
- C. Ethernet
- D. Fibre Channel
Answer: C
NEW QUESTION # 67
Which tasks can be completed using the VxRail Initial Configuration Wizard?
(Choose two)
Response:
- A. Create storage pools
- B. Configure management network settings
- C. Enable vSAN deduplication
- D. Assign node IP addresses
Answer: B,D
NEW QUESTION # 68
Which considerations are essential when planning a VxRail deployment?
(Choose two)
Response:
- A. Witness host for a two-node cluster
- B. Dynamic Fibre Channel allocation
- C. Default RAID configuration
- D. VLAN configuration for management traffic
Answer: A,D
NEW QUESTION # 69
During the design process for a VxRail cluster, which consideration is most critical for workload optimization?
Response:
- A. Network bandwidth
- B. Node discovery options
- C. Fault tolerance settings
- D. Cluster firmware version
Answer: C
NEW QUESTION # 70
Which key consideration is specific to designing a 2-node VxRail cluster?
Response:
- A. Support for Fibre Channel storage
- B. Dedicated backup traffic VLAN
- C. Witness host placement
- D. RAID level selection
Answer: C
NEW QUESTION # 71
What is a primary function of the vSAN in a VxRail cluster?
Response:
- A. Provides high-capacity archival storage
- B. Configures the network infrastructure
- C. Manages the VxRail management console
- D. Offers shared storage across cluster nodes
Answer: D
NEW QUESTION # 72
Which steps are involved in reviewing a completed VxRail configuration?
(Choose two)
Response:
- A. Confirm cluster node placement
- B. Verify IP address assignments
- C. Apply firmware updates to nodes
- D. Validate network connectivity
Answer: B,D
NEW QUESTION # 73
What is the format of the configuration file used to build a VxRail cluster?
- A. PowerShell
- B. JSON
- C. CSV
- D. HTML
Answer: B
Explanation:
VxRail uses JSON-formatted configuration files to define the settings and parameters required to build and deploy a cluster, allowing for structured and machine-readable configurations.
NEW QUESTION # 74
When planning for a VxRail 2-node cluster, which two separate networks are required to be configured for vSAN witness virtual appliance? (Choose two.)
- A. Management network
- B. vSAN witness network
- C. VxRail network
- D. vCenter network
Answer: A,B
Explanation:
The vSAN witness virtual appliance requires connectivity to the Management network for administrative access and the dedicated vSAN witness network to handle witness traffic for cluster quorum.
NEW QUESTION # 75
During the VxRail cluster design process, which component is responsible for managing virtual machines and workloads?
Response:
- A. VMware Horizon
- B. VMware vCenter
- C. Dell OpenManage
- D. VMware vSphere Client
Answer: B
NEW QUESTION # 76
......
Verified D-VXR-DS-00 dumps Q&As - 2025 Latest D-VXR-DS-00 Download: https://tesking.pass4cram.com/D-VXR-DS-00-dumps-torrent.html